AXEON C-Series Cleaners are heavy duty cleaners that quickly and easily mix with water to make an easy to use cleaning solution that
safely and effectively remove a wide range of membrane foulants from polyamide thin film (TF), cellulose acetate (CA) and ultrafiltration (UF) membrane elements.
Clean the membranes with AXEON C10 or C20 Cleaners prior to storage. Using good quality water (RO product water), mix at a ratio of one pound M-100 to 6 gallons of water.
Recirculate storage solution at low pressure (less than 60 psig) through membranes for minimum of 15 minutes.
After re-circulation, shut system down making sure storage solution does not drain out of membranes.
After storage, rinse membranes with good quality water for 30 minutes before system start up.
Clean membranes with AXEON C10 or C20 Cleaner
Using good quality water (RO product water), mix a ratio of one pound M-100 to 6 gallons of water. Place membranes in storage container containing M-100 solution.
After storage, place membranes in system and rinse with good quality water for 30 minutes prior to system start-up.
Get a Quote
|Microbiological growth within membrane
elements and systems during storage
|Thin film composite,
cellulose acetate, ultrafiltration
|1 pound AXEON M-100
to 6 gallons water
|Medium / Low