Protec Industrial Housings

Protec Industrial Housings
Protec industrial 8" housings are designed for continuous use as housing for membrane filtration elements to purify waters at any positive pressure up to 1200 PSI. The design will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel. The models have been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Models with a PSI of 150-600 purify typical brackish waters while models with a PSI of 1000-1200 purify typical seawater. See the “Downloads” page for more information.

Benefits

  1. Available in pressure ratings up to 1,200 PSI
  2. Designed to work with any make of eight-inch spiral wound elements, as well as many hollow fiber elements
  3. Designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X
  4. Multiple-Porting Technology

Specifications

Model Number Entry Location # of Elements Pressure Rating
(psi / bar)
Maximum Operating Temperature
(°F / °C)
PRO-8-300-EP End 1-7 300 / 21 120 / 49
PRO-8-450-EP End 1-7 450 / 31 120 / 49
PRO-8-600-EP End 1-7 600 / 41 120 / 49
PRO-8-1000-EP End 1-7 1000 / 69 120 / 49
PRO-8-1200-EP End 1-7 1200 / 83 120 / 49
PRO-8-300-SP Side 1-7 300 / 21 120 / 49
PRO-8-450-SP Side 1-7 450 / 31 120 / 49
PRO-8-600-SP Side 1-7 600 / 41 120 / 49
PRO-8-1000-SP Side 1-7 1000 / 69 120 / 49
PRO-8-1200-SP Side 1-7 1200 / 83 120 / 49

Get a Quote